KSB GLOBE VALVE DEALER

• Globe valve to BS 1873
• Cast steel body
• Hard-faced seat/disc interface (13 % chrome steel/Stellite)
• Bolted bonnet
• Outside screw
• Outside yoke
• Rotating stem
• Rising handwheel
• Flanged ends
• Butt weld ends
• Graphite gaskets and graphite packing with braided packing end rings offering wiping action
• Fully confined bonnet gasket
• Stem with burnished shank
• Two-piece self-aligning gland follower
• On/off disc
• Integral stem back seat
• Back seat bush made of hardened stainless steel
• Seat ring welded into body

ksb globe valve dealer, cast steel globe valves

• Size: NPS 2-12 Inches / 50 - 300mm
• Class/Rating:  #150,#300,#600  

              Test Pressure

• Class 150        Shell: 32 [bar] ,   Seat: 23 [bar] 
• Class 300        Shell: 78 [bar] ,   Seat: 56 [bar] 
• Class 600        Shell: 153 [bar] , Seat: 112 [bar] 

• ASTM A216 WCB
• ASTM A217 WC6
• ASTM A351 CF8
• ASTM A351 CF8M

• Trim #1: Stem: CR13, Seat Surface: CR13, Disc Surface: CR13.
• Trim #8: Stem: CR13, Seat Surface: ST6, Disc Surface: CR13.
• Trim #5: Stem: CR13, Seat Surface: ST6, Disc Surface: ST6.

Also Available in alternate Trims.

• As per ASME B16.34
• Pressure Seal Bonnet Design
• Stellite hard-faced Seats & Disc surface
• Graphite gaskets & packings with Braided wiping rings
• Direct retrofitting of Actuator
• Reduce bore
• Pressure-Temperature Rating: ASMEB16.34
• Face to Face/End to End Dimension: ASME B16.10
• End Flange Dimensions: ASME B16.5
• Butt-weld End Dimensions: ASME B16.25
• Valve Inspection & Testing: API600, API598 

• Size: NPS 2-8 Inches / 50 - 200mm
• Class/Rating: #900, #1500

            Test Pressure

• Class 900        Shell: 238 [bar] ,   Seat: 174 [bar] 
• Class 1500        Shell: 396 [bar] ,   Seat: 291 [bar] 
• Class 2500        Shell: 660 [bar] , Seat: 484 [bar]   

• ASTM A216 WCB
• ASTM A217 WC6
• ASTM A351 CF8
• ASTM A351 CF8M

1. Trim #1: Stem: CR13, Seat Surface: CR13, Disc Surface: CR13.
2. Trim #8: Stem: CR13, Seat Surface: ST6, Disc Surface: CR13.
3. Trim #5: Stem: CR13, Seat Surface: ST6, Disc Surface: ST6.

Also Available in alternate Trims.

• Gate valve to API 602
• Tested to API 598
• Body made of forged steel
• Bolted bonnet
• Outside screw
• Outside yoke
• Rotating stem
• Stem sealed by gland packing
• Non-rising handwheel
• Reduced bore
• Two-piece self-aligning gland follower
• Graphite gland packing
• Stem with burnished shank
• Fully confined bonnet gasket
• Back seat
• Solid valve disc

• Size: NPS 1/2-2 Inches / 15 - 50mm
• Class/Rating: #800

          Test Pressure

• Class 800        Shell: 205 [bar] ,   Seat: 149 [bar]  

• ASTM A 105
• ASTM A 182 F304
• ASTM A 182 F316
• ASTM A 182 F304L
• ASTM A 182 F316L

1. Trim #1: Stem: CR13, Seat Surface: CR13, Disc Surface: CR13.
2. Trim #8: Stem: CR13, Seat Surface: ST6, Disc Surface: CR13.
3. Trim #5: Stem: CR13, Seat Surface: ST6, Disc Surface: ST6.

Also Available in alternate Trims.

• Globe valve to API 602 (Class 1500)
• Globe valve to ASME B16.34 (Class 2500/4500)
• Tested to API 598
• Body made of forged steel
• Straight-way pattern
• Seal-welded body/bonnet joint (Class 1500/2500/4500)
• Hard-faced seat/disc interface (13 % chrome steel/Stellite)
• Two-piece self-aligning gland follower
• Graphite gland packing with braided graphite packing end rings
• Solid valve disc
• Stem with burnished shank
• Rotating stem
• Rising stem
• Rising handwheel
• Outside screw
• Outside yoke
• Integral ST6 hard-faced seat ring

• Size: NPS 1/2-2 Inches / 15 - 50mm
• Class/Rating: #1500/#2500

          Test Pressure

• Class 1500        Shell: 396 [bar] ,   Seat: 291 [bar] 
• Class 2500        Shell: 660 [bar] , Seat: 484 [bar]  

• ASTM A 105
• ASTM A 182 F304
• ASTM A 182 F316
• ASTM A 182 F304L
• ASTM A 182 F316L
• ASTM A182 F22

• Trim #1: Stem: CR13, Seat Surface: CR13, Disc Surface: CR13.
• Trim #8: Stem: CR13, Seat Surface: ST6, Disc Surface: CR13.
• Trim #5: Stem: CR13, Seat Surface: ST6, Disc Surface: ST6.

Also Available in alternate Trims.